Connection of overhead lights in arch

H-CR-436-36 (red band, 20-26AWG) and H-CR-436-37 (blue band, 16-20AWG) butt splices were used to accomplish these connections, crimped with a GMT232 tool.

Each of the three incoming 22AWG wires from the panel was doubled over and crimped into one end of a H-CR-436-37. Into the other end of each of these three splices was crimped both the 22AWG wire of the LH light as well as a 22AWG link to the RH light.

Each of the three 22AWG links was then spliced to a 22AWG wire of the RH light using a H-CR-436-36