Wing Skins

Install additional wiring for puddle light, wing tip horns, and pod wiring

Fabricate doubler for OAT probe from 032 sheet. Locate OAT probe just forward of the first inspection panel in bottom wing skin. Drill, cleco, Debur doubler and skin. Cleco doubler to skin and final drill OAT probe hole with step drill.

Remove Plastic and Debur stiffeners.

Install stiffeners with shims per plans

Cleco wing skins per plans.

Dimple, Cleco, and rivet nut plates for landing light brackets.

Rivet light brackets together .

Paint light brackets and ribs flat black

Rivet light brackets to wing structure