Scott's RV-14 Build

Aft Canopy Assembly

2 years ago
| Working on: Canopy

Got the aft canopy frame assembly completed. Then on to countersinking and dimpling the rivet holes on the side rails and overlying skins. It's slow and tedious work due to the many holes. Needed 2 long clamps to secure it to the workbench. The God for Harbor Freight being close by.

Riveting the center section handle on the aft canopy assembly

Riveting the center section handle on the aft canopy assembly

Starting to countersink the side rails.

Starting to countersink the side rails.

Getting creative on installing the stiffener.

Getting creative on installing the stiffener.

Finished aft canopy assembly.

Finished aft canopy assembly.

Author

avatar
Scott Davis
Day job at Southwest Airlines. Building an RV-14 in my garage.
Profile
Previous post:
Canopy Side Rails to Forward Assembly Canopy Side Rails to Forward Assembly

This post is from Scott's RV-14 Build

Next post:
Countersinking and Dimpling Canopy Parts Countersinking and Dimpling Canopy Parts