Rudder - Final Assembly and G-Flex Epoxy the Trailing Edge

Today’s Progress:

1. Scuff and clean the Trailing edge on the Left skin and the VA140 wedge.
2. Using the pull rivets attach the stiffeners to the shear clips and each other.
3. Mix up more G-Flex and glue down the left skin trailing edge.

To Do:

1. Install the Rear Spar.
2. Install the counterweight.
3. Install the rudder horn brace.
4. Install the attach strip.
5. Roll the leading edge.
6. Install the Tip Rib.

Estimate to Complete: 4 Hours