Jeff's RV-14A

Rudder - Riveting the Trailing Edge

5 years ago
| Working on: Rudder
| Build time: 6 hr

Progress Today:


  1. Finished riveting the skins.
  2. Installed the Rear Spar.
  3. Riveted the Trailing Edge.


To Do:

  1. Install Counterweight
  2. Install Tip Rib
  3. Roll the Leading edge and Fasten.


Author

avatar
Jeff Paggeot
Profile
Previous post:
Rudder - Final Assembly and G-Flex Epoxy the Trailing Edge Rudder - Final Assembly and G-Flex Epoxy the Trailing Edge

This post is from Jeff's RV-14A

Next post:
Rudder - Rolled the Leading edge Rudder - Rolled the Leading edge