Horizontal Stab #1 - Chapter 8 page 2

Progress Today:

1. Pick all of my Parts for the Horizontal Stab. (Oh Man this is going to be a lot of deburring) Embrace the suck... 🙄
2. Removed the Blue and Deburred the HS-903-1 and the HS-906 Doubler.
3. Match Drilled #30 all the common Holes to the Spar and the Doubler.
4. Installed the 912 Brackets with Cleco’s and final drilled them #30 into the web of the HS-903 and used a #12 to final drill the main hole on the bracket.
5. Removed all of the parts and debuted them and sanded them. Prepped for primer and primed the mating surfaces between the 912 brackets and the 903-1 Spar and the 906 Doubler.
6. Assembled all the parts again and have them prepped for Rivets... this is the last step for page 08-02.