Avionics and Tail Skin Aug 23 2025

Completed as much of the remaining rivets for the rear tailcone skin that i could complete solo. Will have to wait for Rachel to return so i can complete the ones i can't reach; Is about a dozen or so rivets. Match drilled the holes for the magnetometer mount in the tailcone, and prepped and primed that so that part is ready to go when the top forward skin gets riveted in place. The bulk of the day was spent on the wiring and trying to tidy up wires and terminate and pin wires. Was able to get through the bulk of the pins on the GSU25, The main PDU, GAD29, and the power/canbus plug for the GEA24. Wasn't able to do any of the canbus terminations as i need to order some solder sleeves for the shields as well as some shrink sleeves for the window splices.