Entry: Fri Jun 27 2025

Completed installation of FlyLEDs “The Works” landing, taxi, position and anti-collision lights. Experienced a lot of issues trying to get it wired correctly. Traded numerous emails with Paul at FlyLED who was extremely helpful. Anyway, main source of trouble was with the position and anti collision lights and the root source of the problem was the wiring at the terminal where the Red wire makes a jump to the fourth position on the connector block and the YLW and GRN wires move up accordingly (see diagram). I’ve included photos of how I tested the unit using a DC bench tester. The unit was set at 10 volts to test the position and strobe lights and 12 volts to test the landing and taxi lights.