Sumit's RV-10

Oil Door Trimming and Wheel Fairing/Nose Gear Fabrication

2 days ago
| Working on: Canopy, Engine
| Build time: 4 hr
| Reference: Page 47-10. Page 48-4. Page 48-16

Trimmed oil door core to prepare for bonding to the cowl oil door. Fabricated a temporary shim for wheel fairing alignment. Also fabricated two standoffs for nose gear hardware installation.

Author

avatar
Sumit Kumar
Profile
Previous post:
Window and Windshield Flange Repair Preparation Window and Windshield Flange Repair Preparation

This post is from Sumit's RV-10

Next post:
Fairings, Cowling, Vent, and Bonding Surface Preparation Fairings, Cowling, Vent, and Bonding Surface Preparation